The Pride Quantum J6 Bracket mounts under the armrest of Pride Quantum J6 Powerchairs.  The bracket slides into the square receptacle under the armrest that is used on the opposite armrest to secure the joystick controls.  The bracket is secured in place by tightening the set screw on the bottom of the square receptacle. 

Please see Installation Instructions for additional details.

Before ordering check the underside of the armrest to make sure that it has the square receptacle and that no other accessories block access to the receptacle.  The bracket is 7 1/2" long.  Check the measurement from the end of the armrest to the square receptacle to confirm that it is less than 6 1/2".  Some special applications may require a longer bracket.  If this is the case with your chair please call or email SnapIt! for assistance. 903-965-9181 or customerservice@snapitproducts.com. 

Once installed the SnapIt! accesory snaps into the bracket.  This allows the accessory to be removed for transport or used on other devices with the purchase of additonal brackets.

This bracket will be included with the SnapIt! accessory when you select it from the pull down menu.  It is included here for those who may want to purchase additonal brackets for other mobility aid devices and to provide more detailed information on mounting applications.